Specification: Fabrication and Supply of main cold box
Specification: Construction of 1000 HP - Trailer mounted land rig Abraj Rig#106
Specification: Fabrication and erection of Kangaroo Cranes x 2 units for Qatar Petroleum
Specification: Fabrication and Supply of TEG Dehydration Packages
Specification: Supply and Fabrication of Produced water skimmer vessel – 1 No.
Specification: Flue Gas Duct and Stack System (Stack Ø 06 mtr for Saudi Armco)
Specification: Fabrication and Erection of Ship unloader 2 X 1000TPH for Sohar port, Oman
Specification: Shiplift Platform for Goa Shipyard
Specification: Design, Supply and Fabrication of Direct reduction reactor (Energiron ZR project)
Specification: Design, Supply and Fabrication of Disposal Caissons (KIPIC – Al Zour refinery project)
Specification: Design, Supply and Fabrication of Filter vessels (Qty. 11) (Salalah IWP Desalination Plant)
Specification: Design, Supply and Fabrication of Amine still column (Basrah Gas Company)
Specification: Fabrication and Supply of PVD Mast Structure
Specification: Construction of Mast and Substructure KDC 33 (3000HP)
Specification: Mockup Aircraft fire trainer module - Air Bus A380
Specification: Fabrication & Erection of ship loader for YASREF project – SAUDI ARAMCO
Specification: Construction of Turret Catenary Anchor Leg Mooring (CALM) Buoy for A North American customer
Specification: Construction of 150 men accommodation barge Pepper 4501
Specification: Construction of Modules packages for Perenco Sharp Project (Slug Catcher Module)
Specification: SECONDARY ARCH OF SHEIKH ZAYED BRIDGE FABRICATED - 5M X 5M X 75M LONG
Specification: Fabrication, erection & commissioning ALBA Ship Unloader -1000TPH Pneumatic Ship Unloader for Alba/Bahrain
Specification: DABAI - 617-000071 / Reclaimer & Ship loader for Asean cement, Bintulu port, Malaysia. (Qty.1)
Specification: Ship loader for JPMC Phosphate terminal - Jordan Phosphate Mines Co – Aquba (Qty.2)
Specification: Fabrication, erection & commissioning Ship loader -16000 TPH Canada Project (Qty.1)
Specification: Fabrication, Erection & commissioning Stacker Reclaimer - Canada Project - 16000 TPH (Qty.01)
Description: Supply, Fabrication, Inspection & Testing, PWHT of Piping Spools for Unit 1 & Unit 2 (3400 Inch Dia).
Location: ABU DHABI.
Status: Ongoing.
Description: Supply, Fabrication, Inspection & Testing, Surface preparation & Painting of “U Stamp” Pressure Vessel as per ASME VIII Division 1, Latest Edition, with “ASME “ Stamp & NBR (120 nos).
Location: SHARJAH.
Status: Completed 2020.
Description: Supply, Fabrication, Inspection, Surface preparation and Painting of Skid Structures (Turbine Booster Skid, Cooler skid and Warm Skid).
Location: Raz Al Khaimah.
Status: Completed 2020.
Description: Cutting of Existing Couplers and Welding of Riser Pipe with new Male and Female Couplers, NDT, Pickling and Passivation & Hydrotest (Grade – SS316L, 26600 Inch Dia).
Location: Abu Dhabi.
Status: Completed 2020.
Description: Scope 1 - Works with Scrubber Vessels - 2 nos – U 2 Stamp. Scope 2 – Works with skid – 2 Nos.
Location: GHANA.
Status: Completed 2018.
Description: SUPPLY, FABRICATION & PAINTING OF HEAT EXCHANGERS - 11 Nos.
Location: Al Taweelah, Abu Dhabi.
Status: Completed 2018.
Description: Scope - Supply, Fabrication & Painting Of Pressure Vessels(U-STAMP) 6 Nos.
Location: Al Taweelah, Abu Dhabi.
Status: Completed 2018.
Description: Scope - Supply, Fabrication, Inspection and Testing, Surface preparation and painting of Spud cans including Jet Piping for Pandan 4504.
Status: Completed.
Description: Scope - Fabrication of 1370mm Dia x 20mm Thk x 21.1 mtr Long Tubular Piles 175 nos & Welding of C9 Interlocks 2 nos on each Pile Pipe.
Location: Abu Dhabi.
Status: Completed.
Description: Scope - Supply, Fabrication of Mud system ME#32, ME#34 - Tank.
Status: Completed 2020.
Description: Scope - Supply, Fabrication, Inspection, Surface preparation and Painting of steel tubular piles.
Status: Completed.
Description: Scope - Supply, Fabrication, Inspection & Testing, Surface preparation and Painting of Flag Poles (50 m) – 2 Nos.
Location: UAE.
Status: Completed.
Description: Scope - Supply, Fabrication, Inspection, Surface preparation, Painting and installation of simulator at Dubai Airport.
Location: Dubai Airport.
Status: Completed 2019.
Project contract Weight: 273 Tons.
Description: Scope- Fabrication of 2 x units of Multiport M600-30-SF-LV-HHW15.
Location: Sohar, Oman.
Status: Completed Sep 2020.
Project contract Weight: 360 Tons.
Description: Scope - Material Supply, Fabrication, Installation & testing of free issued hydraulic components, E&I components and other works.
Location: Taiwan.
Status: Completed 2020.
Project Contract weight: 180 Tons.
Description: Scope - Supply & Fabrication of Conveyor 3 Sets of Each (Shuttle , Spillage & Feeding Conveyor for Jindal Steel Works (DOLVI & BELLARY).
Location: India.
Status: Completed 2019.
Project Contract weight: 4352 Tons
Description: Scope - Material supply, fabrication, delivery, erection, Installation and cold commissioning for Ship loader and Stacker Reclaimer.
Location: Baffinland, Canada
Status: Completed 2019
Project contract Weight: 314 Tons.
Description: Scope - Fabrication of 1 unit of Slewing Stacker with Tripper car.
Location: LOUISIANA, USA
Status: Completed 2019